High Frequency Ballasts

eHID is a significant advancement in electronic ballast technology thatoffers proven energy savings, flexibilityand control thru networking capabilities, and extended lamp life and lumen output :
BETTER LIGHT at a LOWER COST!

GreenLight technology uses solid state components to transform voltage
Changes the frequency of the power
from60 Hz to 120KHz or higher
Because of this frequency shift, the electronic ballast can function much more efficiently and cooler than a magnetic ballast
Higher frequencies also reduce audible noise to acceptable levels

Features

Increased light output (mean lumens at 90%-95% of initial lumens depending on lamp type)
Reduced energy costs by greater than 50% over traditional core and coil magnetic ballasts
Increased lamp life by more than 70%
Dimming allows for daylight harvesting and further energy reductions

Specifications

Input Voltage: 120-277V (Toroidal transformer available for Canadian 347VAC)
Input Frequency 50/60Hz
Power Factor: .90 to .97 (depending on lamp type & wattage)
Inrush Current <25A
Harmonics – Fully complies with EN61000-3-2
Low THD: <5%
Crest Factor: <1.43
RF (optional): 400/900 MHz (TBD)
Min. Start Temperature -30°C (-22F)
Max. Ambient Temperature: 65°C, (150°F)
Max. Case Temperature: 85°C, (179°F)

Performance

Short Circuit / Open Circuit Operation Protection
Input Current Protection – Internal Fuse
High temperature cut off: 70C, (158F)
Cycle by cycle protection
Re-strike protection
End of lamp life shut-off
Power supply regulation: ±1%

Regulatory/Certifications

CSA, UL, ULC CE Listed
FCC Part 18 limits for EMI/RFI
RoHS compliant

Physical Dimensions

GLV eBallast 450: 87 x 55 x 215 mm / 1.4 kg
GLV eBallast 400: 179 x92.5 x 258 mm / 2.8 kg
EB400PUM: 179 x 92.5 x 258 mm
EB1000PUM: (TBD)

Warranty

3 Year Limited warranty

Product Sheet Download ↓

Catalog (PDF Version)
Product Specs GLV eBallast 450
GLV eBallast 400 Factsheet

Model	Lamp Wattage	Power Factor	Input Voltage (VAC)	Input Current (Amps)	Lamp Frequency (Hz)	Dimming
GLV e-450Ballast	100-450W	.94 - 97	120-277VAC	1.69-5.10A	>106KHz	Up to 50%
GLV e-400Ballast	250 – 400W	.98	120-277VAC	<2.1A	>120KHz	Up to 50%

GreenLight Ventures Smart Electronic Ballasts

GreenLight Smart Ballasts offer the most advanced lighting control for electronic high intensity discharge (eHID) lighting

Photo Sensor Controller - Allows for daylight harvesting & energy savings
Motion Sensor Controller - Reduced energy consumption via adaptation to occupancy use
Network Addressability - Greater management & control over light system
Ambient Temperature Monitor - Protects ballast and extends ballast and lamp life
Lamp Fault & Surge Protection - Prevents failures and reduces maintenance expense
Hot Re-Strike - Minimizes re-strike wait time, instant on
Dimming Capabilities - Reduced energy costs by responding to shifting occupancy use
Tunable - Can tune to address wattage requirements from 175W to 450W

GreenLight Ventures e-450 Electronic Ballast

GreenLight Ventures' GLV e-450 ballast can be set to operate at any wattage between 150 and 400 Watts for High Pressure Sodium (HPS) lamps or 175 to 450 Watts for Metal Halide (MH) lamps.

GreenLight Ventures e-400 Electronic Ballast

Similar to the GLV e-450 ballast , the GLV e-400 ballast 400 can be set to operate at several wattages: 250, 300, 310, 320, 350, 360, 375, 380, or 400 Watts for High Pressure Sodium (HPS) or Metal Halide (MH) lamps.

Centralized Lighting Management

GreenLight offers a web-based, centralized lighting management system

Implement lighting schedules based on occupancy
Implement lighting strategies based
on space utilization
Improve maintenance and lighting
system diagnosis

Wireless Communications Network

Significant reach over wired networks
Supports multiple communications protocols
Lower install costs; flexible architecture

The GreenLight lighting management system is open protocol

Enables your Building Automation System provider to integrate into building control system